This course on NxCAD Part-1 teaches NxCAD Part-1 fundamentals through 1 interactive modules. If you are Beginner, then this course is for you. You can access this course on web and mobile, it’s available in English language.
This course on NxCAD Part-1 teaches NxCAD Part-1 fundamentals through 1 interactive modules. If you are Beginner, then this course is for you. You can access this course on web and mobile. This complete course is available in English language.
GUVI’s NxCAD course is a dynamic and immersive learning experience designed to unlock the full potential of NX-CAD, a sophisticated Computer-Aided Design (CAD) software renowned for its comprehensive tools and functionalities. This course dives deep into the diverse capabilities of NX-CAD, providing learners with the knowledge and skills to efficiently design and manipulate various geometries. Starting with fundamental geometric constructs like polygons, ellipses, and conics, the course empowers users to craft basic shapes and advance to intricate designs through offset, pattern, and mirror functions. The course covers everything from embossing techniques and mirroring features to slots, edge blending, and solid creation, offering a comprehensive toolkit for refining and modifying structures. GUVI’s NxCAD course is an invaluable resource for precision-driven 3D modeling.
GUVI’s NxCAD course is a dynamic and immersive learning experience designed to unlock the full potential of NX-CAD, a sophisticated Computer-Aided Design (CAD) software renowned for its comprehensive tools and functionalities. This course dives deep into the diverse capabilities of NX-CAD, providing learners with the knowledge and skills to efficiently design and manipulate various geometries. Starting with fundamental geometric constructs like polygons, ellipses, and conics, the course empowers users to craft basic shapes and advance to intricate designs through offset, pattern, and mirror functions. The course covers everything from embossing techniques and mirroring features to slots, edge blending, and solid creation, offering a comprehensive toolkit for refining and modifying structures. GUVI’s NxCAD course is an invaluable resource for precision-driven 3D modeling.
Key Features:
Internationally Acknowledged Certification
Completely online and learn at your own pace course
Lifelong access to complete course
Four gamified practice platforms
Committed forum support to answer all of your questions
Refund policy of seven days
Topics you will learn
Beginner Module
Introduction of NX-CAD, load all tools for wide range of task, how to make new files, ribbon bar, top border bar, resource bar, status bar, Profile, Rectangle, Circle, Line, Arc, Spline, Rapid Dimension, Point, Customize Ribbon.
Zoom, Pan, Rotate, Extrude with the limits (value, symmetric value, Until next, Until Selected, Until Extended)
Extrude (Offset from selection, through all) and options in extrude like open profile smart volume, draft, offset and Boolean operations (Unite, Subtract and Intersect)
Revolve (Value and Until Selected), Options in Revolve like open profile smart volume, offset and Boolean operations (Unite, Subtract and Intersect)
Datum Plane- Inferred, At distance, At angle, Bisector, Curves and Points, Two-line, Tangent, Through Object, Point and direction, On curve, etc.
Datum Axis: - Inferred, Intersection, Curve/ Face Axis, On curve vector, XC-axis, etc. Datum Csys: - Dynamic, Inferred, Origin-X point- Y point, X-axis/Y-axis/Origin, Z-axis/Y-axis/Origin, Z-axis/X-axis/Origin.
Datum Csys: - Plane-X-axis-Point, Plane-Y-axis-Point, three planes, Absolute Csys, Csys of current view, Offset Csys, PQR.
Part Modeling Exercise part 1- Extrude
Part Modeling Exercise part 2- Revolve
Block, Cylinder, Cone, Sphere
hole (Symbolic and detailed), Emboss-part1
Emboss-part2, Groove ( Rectangular, Ball End and U Groove)
Pattern (Linear, Circular, Polygon, Along, General, Reference, Spiral and Helix)
Mirror feature, Rib (Perpendicular and Parallel) and Lattice
Thread and Trim Body
Spilt Body, Delete Body, Shell and Thicken
Slot (Rectangular, Ball End, U, T, Dove_Tail), Scale Body (Uniform, Axissymmetric, Non-Uniform)
Make Solid, Bounding Body, Wrap Geometry and Edge Blend
Blend Corner, Chamfer (Symmetric, Assymetric & Offset and Angle), Draft and Tube
Sweep along Guide and Swept Volume
Face Blend (Two--face, Three-face and Feature Intersection Edge) and Ruled
Swept ( used on 2 section and 3 sections along guide curves) and Measure Tool
Course Offerings
Certificate you will get
Certificate Features
Certification from IITM Pravartak.
Certifications strengthen your programming profile and are recognized around the world.
Certificates are awarded upon the course's completion.
Pre Requsites
Access to a computer with NX-CAD software installed.
Enthusiasm to learn and explore the world of 3D modeling.
After this Course
Create intricate 3D models using fundamental geometric constructs.
Navigate the NX-CAD interface with precision and efficiency.
Apply advanced modeling techniques such as embossing and mirroring.
Refine designs with trimming, shelling, and other body manipulation tools.
Demonstrate expertise in chamfering, drafting, and sweeping operations.
Showcase a comprehensive understanding of NX-CAD for diverse design applications.
Course is for
Freshers
Professionals
Students
FAQ's
What is the overview of GUVI’s NxCAD Part 1 certification course?
GUVI’s NxCAD Part 1 certification course enables creativity to flourish as you navigate the dynamic landscape of NxCAD, making this course not just an education but an exciting journey into the heart of design innovation. Get to cover fundamental geometric constructs, advanced modeling techniques and intricate design manipulations while unlocking the boundless potential of 3D modeling.
Why learn the NxCAD Part 1 course?
NxCAD proficiency can position you for a rewarding career in fields that value precision, innovation, and efficient design processes while unlocking your professional career with job titles: CAD Designer/Modeler, Product Development Engineer, Architectural Drafter, CAD Instructor/Trainer, Automotive Design Engineer, Civil/Mech Engineer with relevant bachelor’s or master’s degree.
Why choose GUVI for learning the NxCAD Part 1 course?
Choosing GUVI for learning the NxCAD Part 1 course offers a unique and enriching experience in the realm of Computer-Aided Design (CAD). Further, the course emphasizes practical skill development, allowing learners to apply their knowledge to real-world design scenarios. GUVI learners acquire skills that are directly applicable in professional settings. The course content is tailored to meet industry demands, enhancing your employability.
What are the benefits of learning NxCAD Part 1 certification?
This certification adds value to your professional profile, showcasing your expertise in NxCA, as it validates your application of theoretical concepts to real-world design scenarios, flaunting your profile as ever-ready to meet the demands of the industry.
Is the NxCAD Part 1 course difficult to learn?
GUVI’s NxCAD course (Part-1) is designed to accommodate beginners, providing a gradual introduction to NxCAD. If you are new to CAD, take advantage of the course's beginner-friendly structure, and don't hesitate to seek support from GUVI’s Forum.
How long does it take to learn NxCAD Part 1?
The duration to master NxCAD Part 1 depends on your commitment, dedication, and proactive application of concepts. Typically, learners can expect to complete the NxCAD course within a few weeks, offering a comprehensive and efficient learning experience.
How much does the NxCAD Part 1 certification Course Cost?
The cost of GUVI’s NxCAD Certification Course (Part-1) is INR 3000.
